equipment to treat converter slag

high SiO2 slag out of the system while also was constructed simultaneously with the new converter The flue gas treatment equipment adopted for the new converter was the Oxygen Converter Gas Recovery Sys tem OG which is the same as the existing equipment The utilities and water treatment equipment were expanded to meet the needs of the

Processing of copper converter slag for metal reclamation. Part I Waste Management & Research 441 (d)Simple equipment and techniques for processing of the slag. A mineralogical study revealed (Deng & Ling 2002) that copper

process to convert steel slag into fertilizers - Silicon elution from three types of steel slag fertilizers in a paddy . 2010). This turning point in slag silie fertilizer pro- …

techniques producing granulated slag, which is passed to the Pb smelter to recover Pb and also Cu. Since 1997, the Slag Mill has been used to re-treat converter slag tailings (Tsumeb Corporation Ltd., 1987; Schneider Slag and

After coming out of converter, steel slag is received and transported by slag pots. Due to the high temperature of the steel slag, the slag pot must have high quality. CHAENG slag pot is made by one-piece casting method, which has strong resistance to deformation.

Home > Equipment > Pyrometallurgy Top Blown Rotary Converter (TBRC) TBRC is an advanced smelting equipment for treating anode slime, WEEE, non-ferrous metal smelting slag and setting slurry to recover gold, silver and other precious metal.

2012/01/05· Slag-remaining and double slag steelmaking technology in one converter (MURC) (Ogawa et al., 2001). 1. Slag from this heat can be used in the next heat to realize the early dephosphorization.

In China, after steelmaking, the steel slag is poured from the converter, transported to the slag stacking place, and treated by aging. Then the steel slag is magnetically separated to recover the metal iron (Fe). After magnetic ). −1 ...

12.3 Primary Copper Smelting 12.3.1 General1 Copper ore is produced in 13 states. In 1989, Arizona produced 60 percent of the total U. S. ore. Fourteen domestic mines accounted for more than 95 percent of the 1.45 megagrams

It can also treat copper concentrate and secondary material like scrap copper, scrape lead, lead slag, lead dust, etc. The furnace is characterized by short process, high comprehensive recovery rate, high adaptability to raw material, thorough chemical reaction and combining oxidation and reduction in …

Home > Equipment > Pyrometallurgy Top Blown Rotary Converter (TBRC) TBRC is an advanced smelting equipment for treating anode slime, WEEE, non-ferrous metal smelting slag and setting slurry to recover gold, silver and other precious metal.

SLAG COOLING CONVEYOR EQUIPMENT 例文帳に追加 スラグ冷却コンベア設備 - 特許庁 To stably treat steel making slag such as converter slag , preliminary treatment slag or secondary refining slag produced in a steel making plant.

It can also treat copper concentrate and secondary material like scrap copper, scrape lead, lead slag, lead dust, etc. The furnace is characterized by short process, high comprehensive recovery rate, high adaptability to raw material, thorough chemical reaction and combining oxidation and reduction in one furnace.

To stably treat steel making slag such as converter slag, preliminary treatment slag or secondary refining slag produced in a steel making plant. - 特許庁 スラグ ガラスを用いた発泡材料 例文帳に追加

After coming out of converter, steel slag is received and transported by slag pots. Due to the high temperature of the steel slag, the slag pot must have high quality. CHAENG slag pot is made by one-piece casting method, which has strong resistance to deformation.

Instead of simply dumping slag at landfill sites, we treat it and turn it into premium products. Our strategy for efficient slag management comprises a coordinated array of specialized services that embrace the entire production process and are closely tailored to the needs of our customers at their various locations.

In the near term, there are plans to increase slag flow to 60 tons per hour, extensively monitoring the equipment for wear and sticking behavior. At the same time, trials will be run to maximize off-gas temperature.

In China, after steelmaking, the steel slag is poured from the converter, transported to the slag stacking place, and treated by aging. Then the steel slag is magnetically separated to recover the metal iron (Fe). After magnetic ). −1 ...

Converter slag flotation practice at Mount Isa Mines Limited, in Proceedings Mill Operators' Conference, pp 113-120 (The Australasian Institute of Mining and Metallurgy: Melbourne). Jan 1995 331-363 Jan 1995 331-363

2011/01/01· It was decided to treat slag from produc tions of all different steel grades in the same way. A test campaign of about 200 AOD heats was carried out. Test Procedures 25-kg Dehybor bags were added ...

Home > Equipment > Pyrometallurgy Top Blown Rotary Converter (TBRC) TBRC is an advanced smelting equipment for treating anode slime, WEEE, non-ferrous metal smelting slag and setting slurry to recover gold, silver and other precious metal.

verter equipment shown in Fig. 1. In converter dephos-phorization, oxygen is blown into the converter from the converter top through a lance, and the phosphorus in the hot metal is oxidized and moves to the slag. The control by Fe ...

The slag has good slag adhering effect and can be blown to the converter lining to achieve the purpose of protecting the lining. Frequent replacement of oxygen lance affects normal production Because slag is sticky, the outer layer of oxygen lance will inevitably adhere to steel slag in the process of blowing.

2011/01/01· It was decided to treat slag from produc tions of all different steel grades in the same way. A test campaign of about 200 AOD heats was carried out. Test Procedures 25-kg Dehybor bags were added ...

In the near term, there are plans to increase slag flow to 60 tons per hour, extensively monitoring the equipment for wear and sticking behavior. At the same time, trials will be run to maximize off-gas temperature.

Instead of simply dumping slag at landfill sites, we treat it and turn it into premium products. Our strategy for efficient slag management comprises a coordinated array of specialized services that embrace the entire production process and are closely tailored to the needs of our customers at their various locations.

Converter slag flotation practice at Mount Isa Mines Limited, in Proceedings Mill Operators' Conference, pp 113-120 (The Australasian Institute of Mining and Metallurgy: Melbourne). Jan 1995 331-363 Jan 1995 331-363

Japanese steel mills treat steel slag with steam aging method, and the treated steel slag is used as upper subgrade material. The proportion of this material is 75% converter slag, 20% blast furnace slow cooling slag, and 5% blast

Converting is a type of metallurgical smelting that includes several processes; the most commercially important form is the treatment of molten metal sulfides to produce crude metal and slag, as in the case of copper and nickel converting. A now-uncommon form is batch treatment of pig iron to produce steel by the Bessemer process. The vessel ...

Figure 1: Typical slag buildup in a coreless induction furnace (gray shaded areas) The hottest area of medium and high frequency coreless furnaces is at the mid-point of the power coil. All areas of slag deposit will be at a much

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).